The company’s specialists managed to increase the GeForce GTS 250 (it is used in 3D-maps, in spite of the index of GTX in the designation) to 815 MHz.

In the series came in two models, equipped with the interface PCI Express x16. They differ memory – 1 or 2 GB. The memory is connected with the GPU, the configuration which includes 128 stream processors, using 256-bit bus. The memory works at normal frequency, equal to 2200 MHz. With regard to the frequency of the graphical kernel, equal to 815 MHz, this is perhaps a record value for the cards GTS 250 (or 9800 GTX +), broken up in factory conditions.

As can be seen in photographs taken dvuhslotovye of the cooling system of its own design ECS. Cooler mounted on the motherboard with 1 GB of memory, has one fan. In doing so, the diameter of the impeller so great, that had to make a projection of housing dominating the hard-edged boards. Cooler older models may boast of two cooling fans.

Date news and prices still kept secret.

Technical details about future GPU AMD are not yet available. It is only the original release plans for product line under the brand ATI with support for DirectX 11 – in total, to the end of the year, AMD will release four models.

Despite the difficulties faced by TSMC in the issuance of chips on 40-nanometer technology, models of Radeon HD 4800, HD 4700 and HD 4400 will be produced at facilities of TSMC, and in compliance with the rules of 40 nm. However, in the first half of next year, AMD expects to move to the GPU issue GlobalFoundries, when there will be established manufacturing standards for the 28 nm, while AMD will be ready for a new processor architecture with a «native» support DirectX 11. Thus, from the rules of 40 nm AMD expects to immediately move to 28 nm, bypassing the 32 nm.

In addition to the passive cooling system, which fans will appreciate the quiet, 3D-card can boast twice the memory – 1 GB GDDR5. A month before the exhibition was seen development Gigabyte, plans to equip the Radeon HD 4770 in such a large amount of memory attributed to the company XFX.

Fee for the  passive cooling is that the cooler claim to two slots. Cooler construction  consists of three massive heat pipes and ribbed radiator, which is the length extends beyond the boundaries of the printed circuit board. To connect the monitors serve as connectors D-Sub, DVI and HDMI.

Data on the frequencies at which the components of GV-R477SL-1GI, yet, and no information about price and timing of the emergence of new items for sale.

Novelty called MSI N275GTX Lightning and interesting, first of all, its design, as it is a modern three-dimensional graphics accelerator, being built on the GeForce GTX 275, which many manufacturers also produced and reference nereferensnye adapters.

But, despite the fact that MSI is already such a product, but the processor is compatible with printed circuit board (PCB) under the GeForce GTX 260, use the cooler from the model N260GTX Lightning did not. Instead, it was developed more than a new cooler on the new PCB with 8 +2 phase power supply. In addition, the motherboard, there are «Military Class» elements – solid state chokes – Solid State Chokes (SSC), located in the building-blocks. It was expected that such elements will improve the effectiveness of the scheme, reduce energy loss.

In addition, that the board will be installed 1792 MB of memory class GDDR3, other characteristics (frequency of the memory, GPU and shaders) is not yet known.

Appearance of the first of two new products, known as the Sapphire HD 4890 Vapor-X and shown in the upper two images, exactly follows the appearance of the model, which we described last week. But it works at other frequencies: GPU – 870 MHz (standard frequency – 850 MHz), memory – 4200 MHz (3900 MHz).

Model HD 4890 Vapor-X is a proprietary development of Sapphire. It has a cooling module for the Vapor-X graphics kernel, radiators and fan to remove heat from the shell. According to the company, Sapphire HD 4890 Vapor-X is the first graphics card equipped with both connectors Display Port, HDMI, VGA and DVI. Any two out of four can be used simultaneously, which provides maximum flexibility when connecting to different types of displays. For those who want to use two DVI-Monitor, is also available adapter HDMI-DVI.

GPU core clock speed the second news, HD 4890 Toxic (penultimate and last images), slightly lower than the HD 4890 model Atomic, first video with a clock speed of core 1 GHz. It is 960 MHz. Clock frequency is 1050 MHz memory. Site is equipped with two two-connectors and DVI connector TV-Out. Interface HDMI and VGA supported via adapters. Cooling System Vapor-X with heat pipes from the models Toxic and Atomic has the same configuration.

The manufacturer notes that, in order to improve productivity and reliability in the products of a series of Vapor-X is used in solid electrolyte capacitors and chokes teplootvodyaschie «Diamond Black».

Unfortunately, the price of new products and the timing of their appearance in the Sapphire does not sell names.

It is used for constructing a pair of video G200-350-B3. Each of them has 240 stream processors, associated memory GDDR3 512-bit interface.

Dual card has 32 memory chips from Hynix, the access of 0.77 ns. Each GPU address 2 GB of memory and, in general, the memory card ASUS MARS 295 Limited Edition is 4 GB.

Operating parameters ASUS MARS 295 Limited Edition are: 648/1476/2400 MHz for the GPU, shader and memory respectively, ie the same as the reference GeForce GTX 285. Site has a 6-phase PWM-power, plug PCI-E. Instead nForce 200 chip, it was decided to use yet unnamed model and manufacturer. This is probably PLX or IDT.

Volterra VRM controller and interface of NV-I2C promise the opportunity to adjust the voltage of the software (ASUS Voltage Tweak) to fine tune the work cards. Also, the food chain have the protection (Fused Over Current Protection) of high voltage, which should save the map elements with a strong acceleration.

This product is faster on the GTX 295 and the source refers to him as the fastest solution on the market multi-GPU, using the video mode Quad-SLI. Perhaps attracting the attention of the audience to stand at Computex from ASUS card will be provided.

According to the source, based on the same GPU RV790, and that the Radeon HD 4890 Atomic, has issued another card – Radeon HD 4890 Vapor-X. As shown by name, it is equipped with cooling Vapor-X. 

Circuit board Radeon HD 4890 Vapor-X is blue. It has 1 GB of memory GDDR5, related to the GPU 256-bit bus. 

As seen in the pictures, payment is equipped with connectors D-Sub, DVI, HDMI and DisplayPort. The components of the accelerator operating at full frequencies – 850 MHz (GPU) and 3900 MHz (memory). Home sales Radeon HD 4890 Vapor-X is expected in the coming weeks.

Components cooled card cooler with two regular fans. However, the frequency increased slightly – the kernel pulses at a frequency of 702 MHz (default 648 MHz), shaders – 1584 MHz (1476 MHz) Memory – 2484 MHz. 

More notable than the higher frequencies, difference from the reference sample is a large amount of memory. Site is equipped with 2 GB of memory, connected to 512-bit bus. On board there is two additional 6-contact connector power PCI-E. Connecting the monitor provides two connectors DVI. Stated support for NVIDIA 3-way SLI. 

Sales EVGA GeForce GTX 285 2 GB FTW should begin soon, according to the manufacturer recommended price of $440.

New received the designation in the catalog Gigabyte GV-R465D2-1GI. It has a GPU with 320 stream processors, 128-bit memory bus, 1 GB GDDR2, large cooler, connectors D-Sub, DVI (HDMI via adapter). Site is designed for installation in the AGP slot 8h. It supports technology DirectX 10.1, OpenGL 2.1, and CrossFireX. Clock frequency components manufacturer does not specify, so that it can be assumed that they have equal values for staffing – 600 MHz for GPU and 800 MHz for memory. Approximate price of the product is 100 dollars.

New designated HD4890 PCS + +. She had inherited from his predecessor as the HD4890 PCS +, all the key features, including the cooling ZEROtherm. According to the manufacturer, ZEROtherm provides a good balance between efficiency and noise level. 

A distinctive feature of PowerColor HD4890 PCS + + is the work of the components at higher frequencies. By default GPU core frequency is 1010 MHz and memory frequency – 1100 MHz. To ensure stable operation at such frequencies and create a reserve for «disperse», designers HD4890 PCS + + improved nutrition and the use of its better parts. In particular, it is a polymer capacitors and MOSFET power transistors with low resistance value of the channel open. 

The accelerator will be available as a separate product and as part of the set, released a limited series, which includes a full version of the game Battle Forge.